Aquaflam is the name of the new series of water fireplace inserts. The new fireplace inserts combine efficiency and high heating costs with ease of use and modern design.
Aquaflam fireplace inserts allow the connection to the existing central heating and include combined with solar heating or heat pump. Water fireplace insert produces cheap and environmentally friendly heat from wood, a renewable energy source, supplying the whole house heating and domestic hot water.
With fireplace insert Aquaflam you get not only the annual savings in heating costs but also a very good price-performance ratio of the acquisition cost.
Inset Aquaflam have excellent facilities and offer many benefits you receive or not with other products only at extra cost, included here, among other things:
high efficiency and very low emission values
Automatic combustion control for more convenient operation
heavy version of the combustion chamber and heat exchanger made of 6 mm thick steel boiler
integrated cooling loop for protection against overheating
Meets the strictest standards including BImSchV, DIN Plus and 15a B-VG
duplicate airwash for clear glass
electronically controlled external air supply
Water connections on both sides of the fireplace insert to facilitate the connection of cases set on the heating circuit
removable door frame and integrated handles for easy installation
In a nutshell: water-bearing chimney inserts Aquaflam you fulfill the dream of a comfortable and efficient wood heating while protecting the environment and your wallet.
source: chimney insert | http://www.chimneyinsert.com/index.php/tag/heat-exchangers/
30 Aralık 2011 Cuma
29 Aralık 2011 Perşembe
Inset Spartherm
Anyone interested in fireplaces, which is the name Spartherm well known. The German manufacturer is known for the production of high quality fireplace inserts and stoves.
Fireplace insert Spartherm Arte Wh-4S
Spartherm fireplaces convince a modern design that reflects the trends in the market. Unique is the Spartherm products NICH only the external form, but also the combustion technology and patented many innovations Techniche.
If you are looking for a fireplace insert of the highest quality, then you will find Spartherm sure the right model. The Produktpallete is very wide and meets the highest requirements and your individual needs. If you still can not select from the standard range can then Spartherm is the right partner for tailored individual solutions.
In Spartherm range you will find fireplace inserts with straight glass, see-through fireplaces, fireplace inserts with double-sided glass L-shaped, three sided fireplace inserts and finally glazed models with prismatic or round windows.
Spartherm characterized by a precise technique of sliding window pull fireplace inserts. Especially popular is the fireplace insert series Spartherm Varia, which also brings large-scale burning fireplaces with spacious space to the fore.
Source : chimney insert | http://www.chimneyinsert.com/index.php/inset-spartherm/
Fireplace insert Spartherm Arte Wh-4S
Spartherm fireplaces convince a modern design that reflects the trends in the market. Unique is the Spartherm products NICH only the external form, but also the combustion technology and patented many innovations Techniche.
If you are looking for a fireplace insert of the highest quality, then you will find Spartherm sure the right model. The Produktpallete is very wide and meets the highest requirements and your individual needs. If you still can not select from the standard range can then Spartherm is the right partner for tailored individual solutions.
In Spartherm range you will find fireplace inserts with straight glass, see-through fireplaces, fireplace inserts with double-sided glass L-shaped, three sided fireplace inserts and finally glazed models with prismatic or round windows.
Spartherm characterized by a precise technique of sliding window pull fireplace inserts. Especially popular is the fireplace insert series Spartherm Varia, which also brings large-scale burning fireplaces with spacious space to the fore.
Source : chimney insert | http://www.chimneyinsert.com/index.php/inset-spartherm/
28 Aralık 2011 Çarşamba
Schmid fireplace insert
German manufacturer Schmid fireplace, with its large selection of fireplace inserts. Its range includes fireplaces in various sizes and fronts.
Schmid fireplace inserts are made of steel plate and the dome of the fireplace insert is made of high-quality cast. Both versions are available with a swivel and pull-up type with fireplace door. Swivel models are designated by “s”, such as Lina 6745 s, pull-models then with “h”, eg Lina 6745 h.
Especially popular are the fireplaces Lina straight glazing. The gr0ße glass with airwash is a real eye-catcher for all viewers. As a classic fireplace insert in this series is just the aforementioned fireplace insert Lina 67th
Who wants a fireplace with engages sure like to use the fireplace series Ekko. The two-way or three-sided glazing ensures an even greater view of the fire. The glazing system can optionally be run on the left or right side.
If they prefer in their living room rather round shapes, then it is for the fireplace insert Ronda is the right choice.
Finally comes fireplace insert Pano With its prismatic glazing.
All Schmid fireplace inserts are made of tunnel fires (review fireplaces) are available. The second fireplace door can be pull-up or swivel. The front door is in the standard design in anthracite color, if desired they can be executed in chrome or gold, matte or glossy, or trim in the above colors.
Schmid returns to his fireplace inserts an extensive range of fireplace accessories. Is available at other automatic combustion control, memory essays, water coil, or an outdoor lighting system, with which you can heat the fireplace insert easily and conveniently from the hallway.
Inset Schmidt are so varied that everyone chooses the best option for his living room. From the name of the insert, the size of the front are easily removed. For example, Lina 6745 is for a fireplace insert with 67 cm width and 45 cm height of the front door.
Source: Chimney insert
Schmid fireplace inserts are made of steel plate and the dome of the fireplace insert is made of high-quality cast. Both versions are available with a swivel and pull-up type with fireplace door. Swivel models are designated by “s”, such as Lina 6745 s, pull-models then with “h”, eg Lina 6745 h.
Especially popular are the fireplaces Lina straight glazing. The gr0ße glass with airwash is a real eye-catcher for all viewers. As a classic fireplace insert in this series is just the aforementioned fireplace insert Lina 67th
Who wants a fireplace with engages sure like to use the fireplace series Ekko. The two-way or three-sided glazing ensures an even greater view of the fire. The glazing system can optionally be run on the left or right side.
If they prefer in their living room rather round shapes, then it is for the fireplace insert Ronda is the right choice.
Finally comes fireplace insert Pano With its prismatic glazing.
All Schmid fireplace inserts are made of tunnel fires (review fireplaces) are available. The second fireplace door can be pull-up or swivel. The front door is in the standard design in anthracite color, if desired they can be executed in chrome or gold, matte or glossy, or trim in the above colors.
Schmid returns to his fireplace inserts an extensive range of fireplace accessories. Is available at other automatic combustion control, memory essays, water coil, or an outdoor lighting system, with which you can heat the fireplace insert easily and conveniently from the hallway.
Inset Schmidt are so varied that everyone chooses the best option for his living room. From the name of the insert, the size of the front are easily removed. For example, Lina 6745 is for a fireplace insert with 67 cm width and 45 cm height of the front door.
Source: Chimney insert
27 Aralık 2011 Salı
Chimneys and draft conditions
The main function of a chimney is to generate the necessary train for combustion and to derive the exhaust from the building.
A train is considered good for a good combustion indispensable. As good train in general between 10 and 20 Pa (1-2 mm VC). The train is generated from the chimney, not from the stove or fireplace.
Essential to the train is the construction of the chimney
A tall chimney can produce more train at inadequate train the solution from the construction of a high chimney exist. The diameter of the chimney should be no less than the diameter of the flue pipe connection at the furnace or chimney fireplace. A circular inner tube usually produces a better train than a square. Through pipe bends will reduce the train.
When bends must be used, we recommend the installation of two 45-degree pieces.
Combustion air is essential for the train
An open fireplace requires about 300 cubic meters of air every hour, while a closed fireplace draws significantly with about 30 cubic meters per hour manages a extractor fan or a fan of more air than a this chimney created in the space one under pressure through this vacuum reaches smoke in the room.
If outside air can pass directly to the fire station, a lack of combustion air is avoided.
Influence of the wind
The train can by high trees, cliffs or tall buildings affected whill.The problem is usually by lengthening the chimney solve.In extreme cases, an exhaust fan installed whill de train of the chimney can be stabilized by a draft regulator.
Train is just hot air rising
High temperatures create a strong good chimney results are achieved if the height and the diameter of the chimney to the fireplace fit.To heavy train will cause the heat to quickly sucked into the chimney maintained.A to train can be strong with a slider to regulate with draft regulators (in the flue pipe or chimney) or throttle valves.
If more than one smoke pipe bends are installed, the train also decreases.
Troubleshooting (wood fireplaces)
The size is important
An oversized furnace can produce soot and smoke problems, while too little oven is often too strong ever fired, which can lead to warped and cracked parts.
What do you want to use the oven?
Heat source
Aesthetics (a piece of furniture)
Main source of heat or reserve
An oversized furnace will not do you any
The furnace constantly receives too little air – this creates a lot of smoke, soot, tar and Ash. When the oven is too little air gets, the glass always dark.
A stove is too small you will not matter
The furnace must constantly generate more heat than it can, why he always fired too strong shall. The result can be cracked and warped parts (burn plates, smoke dampers, etc.), takes over for the Jotul no guarantee.
If the fire to get going badly, can put behind it the following reasons:
Not enough air: Open the Sometimes throttle must also open the door (about 1 cm large gap). Is this make sure that the slide open can also open the door to the ash pan.
Bad chat-Wood: Use small pieces of split wood come-together with crumpled newspaper, and add larger pieces to thinking you remember: The smaller and drier, the better.
Not pulling / cold chimney: Preheat the chimney on by holding a torch made of newspaper up in the oven until the chimney draws.
Smoke in the room can be caused by:
Wood quality: a lot of moisture wood more smoke than the chimney can be derived.
Ventilation systems like air conditioning or exhaust fans in bathrooms or kitchens can (by generating negative pressure) on the chimney with air supply.In these cases, you have to bring outside air to the fireplace.
Operating errors: Always open the damper and primary air control before you load up the stove again. Open the door slowly.
Flue pipes: Remember that smoke affect horizontal flue pipes and pipe bends the train.
A chimney that is too short to train a little too cold for the fireplace. A chimney can cause none – or negative – train. The inner pipe of the chimney must be properly connected to the chimney and the chimney and have the right size.
Maybe the chimney is blocked by bird nests, soot or tar.
Short burn times can be caused by:
Wood load: Large pieces will burn longer than you small.Use hardwood chopped was split and about 12 months stored dry.
Too strong a train in the chimney, which leads to insufficient combustion.
Operating errors: Primary air control should be slowly toward the closed position, and then finally closed when the fire is established.
Let the fire burn for long periods of time with ash pan door open, otherwise the fire burns too strong.
Explosions (gas explosions) can be caused by:
When the air control during reloading of wood in the sometimes combustor you have to wait about 15 minutes before you can close the air control again.
The secondary air supply is possibly clogged with soot or tar.
Moist wood requires a tremendous amount of energy to dry before it can ignite and cause these burns gases in the combustion chamber of an explosion.
Not enough train.
Difficult to control (Overheating)
Defective seals.
Wrong fuel: Never burn old pallets, particle board, waste products or waxed.
Too strong a train in the chimney: Reduce the train with a damper or draft regulator.
Too little heat
The most common reasons for low heating power are:
Wood quality
Not enough train in the chimney
Operational errors
Construction of the building (insulation, ceiling heights, etc.)
Too small oven
When the wood burns slowly at low temperature, it produces tar and other organic vapors, which adheres together with moisture this form soot soot then to the chimney insert walls.
Soot is the food for chimney fires
Too much soot may be caused by:
Wood quality in the wrong size
Not enough train in the chimney
Operational errors
Furnace size (too low temperature)
Be swept before the start of the heating season, the chimney.
Chimney Insert
A train is considered good for a good combustion indispensable. As good train in general between 10 and 20 Pa (1-2 mm VC). The train is generated from the chimney, not from the stove or fireplace.
Essential to the train is the construction of the chimney
A tall chimney can produce more train at inadequate train the solution from the construction of a high chimney exist. The diameter of the chimney should be no less than the diameter of the flue pipe connection at the furnace or chimney fireplace. A circular inner tube usually produces a better train than a square. Through pipe bends will reduce the train.
When bends must be used, we recommend the installation of two 45-degree pieces.
Combustion air is essential for the train
An open fireplace requires about 300 cubic meters of air every hour, while a closed fireplace draws significantly with about 30 cubic meters per hour manages a extractor fan or a fan of more air than a this chimney created in the space one under pressure through this vacuum reaches smoke in the room.
If outside air can pass directly to the fire station, a lack of combustion air is avoided.
Influence of the wind
The train can by high trees, cliffs or tall buildings affected whill.The problem is usually by lengthening the chimney solve.In extreme cases, an exhaust fan installed whill de train of the chimney can be stabilized by a draft regulator.
Train is just hot air rising
High temperatures create a strong good chimney results are achieved if the height and the diameter of the chimney to the fireplace fit.To heavy train will cause the heat to quickly sucked into the chimney maintained.A to train can be strong with a slider to regulate with draft regulators (in the flue pipe or chimney) or throttle valves.
If more than one smoke pipe bends are installed, the train also decreases.
Troubleshooting (wood fireplaces)
The size is important
An oversized furnace can produce soot and smoke problems, while too little oven is often too strong ever fired, which can lead to warped and cracked parts.
What do you want to use the oven?
Heat source
Aesthetics (a piece of furniture)
Main source of heat or reserve
An oversized furnace will not do you any
The furnace constantly receives too little air – this creates a lot of smoke, soot, tar and Ash. When the oven is too little air gets, the glass always dark.
A stove is too small you will not matter
The furnace must constantly generate more heat than it can, why he always fired too strong shall. The result can be cracked and warped parts (burn plates, smoke dampers, etc.), takes over for the Jotul no guarantee.
If the fire to get going badly, can put behind it the following reasons:
Not enough air: Open the Sometimes throttle must also open the door (about 1 cm large gap). Is this make sure that the slide open can also open the door to the ash pan.
Bad chat-Wood: Use small pieces of split wood come-together with crumpled newspaper, and add larger pieces to thinking you remember: The smaller and drier, the better.
Not pulling / cold chimney: Preheat the chimney on by holding a torch made of newspaper up in the oven until the chimney draws.
Smoke in the room can be caused by:
Wood quality: a lot of moisture wood more smoke than the chimney can be derived.
Ventilation systems like air conditioning or exhaust fans in bathrooms or kitchens can (by generating negative pressure) on the chimney with air supply.In these cases, you have to bring outside air to the fireplace.
Operating errors: Always open the damper and primary air control before you load up the stove again. Open the door slowly.
Flue pipes: Remember that smoke affect horizontal flue pipes and pipe bends the train.
A chimney that is too short to train a little too cold for the fireplace. A chimney can cause none – or negative – train. The inner pipe of the chimney must be properly connected to the chimney and the chimney and have the right size.
Maybe the chimney is blocked by bird nests, soot or tar.
Short burn times can be caused by:
Wood load: Large pieces will burn longer than you small.Use hardwood chopped was split and about 12 months stored dry.
Too strong a train in the chimney, which leads to insufficient combustion.
Operating errors: Primary air control should be slowly toward the closed position, and then finally closed when the fire is established.
Let the fire burn for long periods of time with ash pan door open, otherwise the fire burns too strong.
Explosions (gas explosions) can be caused by:
When the air control during reloading of wood in the sometimes combustor you have to wait about 15 minutes before you can close the air control again.
The secondary air supply is possibly clogged with soot or tar.
Moist wood requires a tremendous amount of energy to dry before it can ignite and cause these burns gases in the combustion chamber of an explosion.
Not enough train.
Difficult to control (Overheating)
Defective seals.
Wrong fuel: Never burn old pallets, particle board, waste products or waxed.
Too strong a train in the chimney: Reduce the train with a damper or draft regulator.
Too little heat
The most common reasons for low heating power are:
Wood quality
Not enough train in the chimney
Operational errors
Construction of the building (insulation, ceiling heights, etc.)
Too small oven
When the wood burns slowly at low temperature, it produces tar and other organic vapors, which adheres together with moisture this form soot soot then to the chimney insert walls.
Soot is the food for chimney fires
Too much soot may be caused by:
Wood quality in the wrong size
Not enough train in the chimney
Operational errors
Furnace size (too low temperature)
Be swept before the start of the heating season, the chimney.
Chimney Insert
Kaydol:
Yorumlar (Atom)